An Overview Of The Benefits Of Transcutaneous Electrical Nerve Stimulation

The acronym for Transcutaneous Electrical Nerve Stimulation is TENS. This is a pain relief method that involves a device that transmits electrical impulses via electrodes on the skin to a specific area of ​​the body that is painful. It is useful for the relief of acute and chronic pain. Electric stimulation for pain management goes back to the Ancient Greeks and, more recently, Benjamin Franklin was a great proponent of the concept. However, the first patented modern machine made its debut during 1974 in the USA.

TENS has proved to be effective for many types of pain. It is commonly used during childbirth, after surgery, for bursitis, tension headaches, tendonitis, cancer, chronic wounds, arthritis, migraine headaches, injuries, and other painful conditions. Medical practitioners believe that the technique stimulates the body to produce endorphins which are natural painkillers. However, they do not claim that this therapy addresses the root cause of pain. Its primary use is to offer short-term relief while healing is occurring.

A TENS device enterprises of an electric unit that is connected to electrodes. These are attached to the skin near the targeted area. When the device is switched on, a low-voltage current is delivered into the body. During therapy, the patient will feel a warm, tingling sensation.

A session usually lasts between 5 and 15 minutes. Treatment may take place as often as necessary according to the severity of the pain. TENS can best be described as an electrical massage. It is widely used by physiotherapists, massage therapists, and chiropractors. Portable systems are available so that patients can apply the therapy at home.

In the USA, there are over 100 different types of portable TENS machines which have received approval from the Food and Drug Administration. However, the public may not use them unless authorized by a medical practitioner. Some units deliver the electrical impulses via acupuncture needles. This method has to be performed by a qualified health care practitioner.

Research indicates that TENS therapy has shown some efficiencies with cancer patients, especially those who have neuropathic pain which is related to nerve or tissue damage. In such cases, TENS works best when combined with medication. It has shown to be particularly helpful to relieve painful bones and muscles after major surgical procedures.

Patients who are allergic to adhesives may react adversely to the electrode pads. This therapy is not suitable for patients who have heart problems. Also, it should not be administrated to people with implanted defibrillators, pacemakers, infusion pumps, or any other internal device that may malfunction due to the electrical current. If a woman suspects she may be pregnant, she should advise the practitioner because the effects on an unborn fetus are not yet known.

Transcutaneous Electrical Nerve Stimulation is otherwise considered to be safe. Anyone applying the treatment at home should take care that the current is not too intense because it may irritate or burn the skin. Never place the electrodes near the throat, brain, heart, or over the eyes. Always ensure that you know how to operate the device correctly and that you have received instruction from a professional practitioner.

Affiliate Programs To Sign Up With

Make money online with affiliate programs can be tough but it can be the most rewarding choice you have ever made. Choosing an affiliate program to start with is the most important part of your online business.

There are so many affiliate programs to choose from. It can be difficult to know which one to sign up with. I personally recommend Clickbank for a comprehensive list of top ranking and highest paying affiliate programs. You will receive a check from Clickbank for your contracts earned twice a month.

If you prefer to receive payments via PayPal, then go to PayDotCom. It is a huge affiliate center with marketplace of products you can promote.

When considering which affiliate programs are best for you, I recommend that you choose one that is specifically related to your site's content and target audience. You can also promote a variety of online digital products as an affiliate. I personally recommend that you choose an affiliate program or products that you are familiar with. This way, it is better for you to recommend these to other. Imagine you are selling something that you know nothing about, you are not going to convince someone to buy it from you.

Personally, I mostly use Clickbank and PayDotCom but I suggest you look around because most companies offered free affiliate programs. Some only allowed affiliates to sell their products after they have purchased it. Whichever websites you are viewing, just scroll down to the bottom and look for affiliate link. Some business owner does not like to display the link in the homepage for everyone to see, so sometimes the affiliate link could have been found in the "about us" page.

What Software Should I Use to Create My CD or DVD Artwork?

After recording your album, having it mastered and pressed, you head over to your disc duplication facility’s website to place your order. Reading up on the ordering process you notice that you have the option to have artwork printed on the disc face, and can also have tray card and insert artwork printed. This is a great idea, as it allows you to give your project a more professional look and feel. You can either hire a print designer, who will hopefully already know all of the proceeding information. Or you can have a go at it yourself, utilizing one of the many different graphics creation programs available. If you are choosing to create your own artwork, read on.

There are many different programs out there that can be used to create print artwork. One of the more popular programs is Adobe Illustrator. Adobe Illustrator is a vector based drawing program, available for both PC and Macintosh computers. You could also use, CorelDRAW, Paint Shop Pro, or even Adobe Photoshop. I will go into a little bit more detail about what the differences are between some of these programs later on in this article, and why some of them are better suited for print design. Here is a list of 3 terms you should be familiar with before starting your artwork project.

1. Raster Graphics

Raster graphics are also known as bitmap graphics. This form of graphics image is a data file or structure representing a generally rectangular grid of pixels, or blocks of color, on a computer monitor, or other display device. Think of a raster images as a checkers board, with each square (pixel) on the board displaying a different color. This collection of colored dots (pixels), in turn form the full picture. The quality of a raster image is determined by the total number of pixels (resolution), and the amount of information in each pixel. Raster graphics are practical for photographs and photo-realistic images because of the way that they display images. Pretty much all photos you will find on the internet, and all photos you take with your digital camera will be raster images. You may want to use photographs for your CD or DVD’s artwork, but you must mind a few certain things:

A. DPI –
I will go into this a bit further in the “DPI” section of this article. In a nutshell, any photograph that you would like to use for print must be 300 DPI (dots per inch) or higher. DPI refers to the density of pixel information in a photograph.

B. Color Mode –
There are two basic modes of color: RGB and CMYK. All you need to know really is that all print artwork must be created as a CMYK document, as this refers to the colors of ink that a printer uses to recreate your artwork. If you create your artwork as an RGB document, the printed document will most likely shift in color. For more info on this, please refer to my last article. What do you need to start a CD duplication project?

2. Vector Graphics

Also known as geometric modeling, this form of graphic uses geometrical primitives such as points, curves, and lines to represent images. Instead of displaying blocks of color to represent a photo vector images rely on set points to determine the outline of an object, using mathematical formulas to determine the curve of the lines between said set points. Vector graphics are ideal for simple or composite drawings that do not need to achieve photo-realism. I suggest that you used vector objects for all of your artwork’s areas that are not photos.

3. DPI

Dots per inch, (DPI) is the number of individual dots of ink a printer can produce within a one-inch space. This translates as, the higher the DPI, the sharper the image. Although, most commercial printers will tell you that anything over 300DPI would be considered “print-quality”. I recommend that you make sure that your artwork is at least 300DPI, with 600DPI being the optimal setting for your artwork.

After all this technical mumbo-jumbo, you’re probably scratching your head, still unsure of what program to use to create your artwork. The truth is you can use pretty much any graphics program to create your artwork, providing that you correctly set the DPI and color mode of your document. Personally, I usually use a combination of Adobe Photoshop & Illustrator to do all of my print artwork. I edit all bitmap images in Photoshop and create all of my vector content in Illustrator, combining the two in Illustrator. My advice is now that you have the basic background knowledge, experiment to figure out what works best for you!

Email Marketing – The Pros And Cons of Marketing With Email

Many small businesses are considering jumping into the world of email marketing. Email marketing has many different advantages, but it also has a few drawbacks that you need to keep in mind. The truth is that when utilized in the correct fashion it can be an extremely powerful and cost effective way of promoting your business and producing more sales. Once you learn about the pros and cons of email, you will be able to begin your own campaigns and get started down the path towards increased success and profitability.

The Advantages of Email Marketing

There are several key benefits to running an email marketing campaign. One of the most important is how cost efficient is can be. There is no other form of direct marketing that is as cheap as email marketing is. A 2005 study by the Winterberry Group found that for every dollar spent on email marketing, $15.50 was earned in return. There is much relevant data pointing to email marketing having a superior ROI than telemarketing, direct mail campaigns, radio or billboard advertisements and more.

Another advantage that email has is that you can quickly get your message across, and you can reach your customers and prospects in a place where they are comfortable communicating. If you have an idea for a new sale or promotion for the upcoming weekend, you can inform all of your customers about that immediately. With print advertising, traditional direct mail or anything else, the turnaround time could be days or possibly even a week or more.

One of the real strengths to running an email campaign is how effectively you can track the results that it produces. You will be able to see every click that is made to your website as a result of the email, and you will be able to see statistics such as how many people read the message, how many times they read it, if they ended up making a purchase and on down the line.

There is no other form of marketing or advertising that produces such an array of in-depth statistics. It’s an invaluable way to track your marketing efforts, and make the most out of every dollar you put into promotion.

Finally, another important advantage to email marketing that you will want to remember is that it’s the perfect way to convert prospects over a long period of time. No matter how great your products or services may be, not every person will be immediately ready to make a purchase or investment. Email marketing is the perfect tool to continue chipping away at those prospects over the long haul. By developing a relationship with each prospect and providing them with useful information, you will gain their trust and stay at the forefront of their mind.

The Disadvantages of Email Marketing

The largest disadvantage of email marketing is that so many people today are fed up with spam. All of our accounts are flooded with wasted emails everyday, and it’s a worldwide plague of the largest scale. Because of this, many people are wary about opening up emails from businesses, or about trusting anything they see in their inbox.

You can help combat this problem by being as transparent as possible. This means making it easy for people to see who is sending your message and what it’s about. It also means ensuring that all of your email addresses are used with permission, and you never purchase a list or steal addresses from another website.

Another disadvantage with email marketing is that far too many small business owners or managers know how to make a campaign work for them. Perhaps they try using gimmicks or copying an email that somebody else sent out. However, a much more effective strategy is sticking within your own identity, playing to your strengths and providing your prospects and customers with exactly what they are looking for.

Making Email Marketing Work for You

The bottom line is that the benefits of email marketing far outweigh the disadvantages. It’s all about learning how to run your own campaigns in the right way, and for maximum success there will be some trial and error as you traverse that path. By not utilizing email campaigns you’re missing out on a huge opportunity to help your business become more efficient and more profitable.